JPoint / Docter Optics Picatinny Mount
Mfr # A-2075
This unique mount will accept either the JPoint Optic Red-Dot or the Docter Red-Dot sights. The lowest profile mount of its kind on the market. This mount is designed to fit the Picatinny rail, MIL-STD-1913. One of the main objectives in the design is to incorporate protective sides built into the mount, this makes for a very rigid set-up. Great as a back-up or close range auxiliary sight. It is machined from a solid billet of Aluminum with a black anodized finish. Red-Dot sight not included.
Picatinny Hand stop
Mfr # A-2086
This Rail Mounted Hand Stop is contoured 360 degrees in all directions to provide a very comfortable fit. It can be reversed depending on operator preference. Made from 6061 Aluminum, with a black anodized finish. It is manufactured to fit MIL-STD-1913 Rail Systems.
Offset Flashlight Mount Scout
Mfr # A-2066
This flashlight mount was designed around the Surefire Scout Model. This mount keeps the flashlight very close and tight to the Picatinny rail. Made from 6061 Aluminum with a black anodized finish. It is manufactured to fit MIL-STD-1913 Rail Systems.
Short Projection Flashlight Mount
Mfr # A-2061
This Flashlight Mount has a very short projection, in doing so it stays very close to the weapon hugging the rail system in the closest configuration possible. The advantage to this mount is less chance of the weapon snagging on close quarter obstructions. This mount was designed around the Surefire 6P, it has a 25.5mm (1” Inch) bore and will fit other brands of flashlights having a 1” inch: body. Made from Aluminum with black anodized finish. It is manufactured to fit MIL-STD-1913 Rail Systems.
Short Projection Flashlight Mount
Mfr # A-2064
This Flashlight Mount has a very short projection, in doing so it stays very close to the weapon hugging the rail system in the closest configuration possible. The advantage to this mount is less chance of the weapon snagging on close quarter obstructions. This mount was designed around the Surefire 6P, it has a 26.25mm (1.032” Inch) bore and will fit other brands of flashlights having a 1.032” inch: body. Made from Aluminum with black anodize finish. It is manufactured to fit MIL-STD-1913 Rail Systems.
Extended 45 Degree Accessory Rail.
Mfr # A-3010
This item is great for extending scope rail off to the side for additional accessories; ideal for standard rifles where you have limited rail space. This will extend a mounting point out from under the scope to the left or right side. Will clear a 50mm objective. Made from Aluminum with black anodize finish. Rail is manufactured to MIL-STD-1913.
M14 / M1A Front Rail Kit
Mfr # A-3025
This rail mounts over the front OEM sling swivel, just remove stock rivets, mount original front sling swivel between rail and stock, fasten with washers and screws provided in kit. This 3 ½” rail is great for mounting a bipod, or other accessories. Made from 6061 Aluminum, black anodized finish. Rail is manufactured to MIL-STD-1913.
M1A Mid Rail for Scout / Scout Socom
Mfr # A-3024
This rail is a direct replacement to the factory OEM rail. It will give you a full true MIL-STD-1913 Picatinny rail. This accessory rail will allow for more options when mounting optics. This allows you to utilize the entire 4” of rail when mounting different configuration of scopes and optics. This rail will fit the M1A Scout / Scout Socom Rifles.
Top Extended Rail
Mfr # A-3026
This rail system is designed for the Springfield M1A Scout / Scout Socom. A direct replacement to the factory 4” OEM rail, it mounts to the existing mount ring with 6 ea screws and runs back to the stripper clip. This accessory rail will allow for more options when mounting optics. Rail is approximately 12 “long. Rail will fit the M1A Scout / Scout Socom Rifle. Made from 6061 Aluminum with black anodized finish. Manufactured to MIL-STD-1913.
JPoint / Docter Optics Mount Riser
Mfr # A-2076
Used with Mfr # A-2075 JPoint / Docter Optic Mount this will allow optic to co-witness the Iron Sights, when used on the AR A-3 style Flat Top. This Riser Block will now also accept the Aimpoint Micro Red Dot, to be directly mounted on top of Riser Block, and will allow co-witnessing of the Iron Sigths on the AR A-3 Style Flat Top. Made from a solid billet of Aluminum with black anodize finish. Manufactured to MIL-STD-1913
M-92 Scope Mount
Mfr # A-3027
This Scope Mount is designed to fit the popular Yugo M-92 Carbine and pistol. This Rail is made from 6061 Aluminum with black anodized finish. Rail is manufactured to MIL-STD-1913.
AKSU Scope Mount
Mfr # A-3028
This Scope Mount is designed to fit the popular Russian and Bulgarian AKSU Carbine and pistol. Made from Aluminum with black anodize finish. Rail is manufactured to MIL-STD-1913.
Saiga JPoint Docter Mount
Mfr # 2072
This unique mount will accept either the JPoint Optic Red-Dot or the Docter Red-Dot sights. It utilizes a universal mounting plate. It was specifically designed to mount on the Saiga Shotgun. Installation is simple, just drift out the rear sight, slide the mount into the Saiga dovetail and tighten down both screws. The lowest profile mount of its kind on the market. One of the main objectives in the design was to incorporate protective sides that are built into the mount. Machined from a solid billet of Aluminum with a black anodize finish. Red-Dot sight not included.
ACOG Rail Mount
Mfr # A-3011
This rail mounts around the body of the ACOG, allowing the mounting of such devices as laser, and Red Dots. Made from 6061 Aluminum. with a black anodized finish. It is manufactured to fit MIL-STD-1913 Rail Systems.
Offset Flashlight Mount E-Series
Mfr # A-2065
This flashlight mount was designed around the Surefire E-Series Model. This mount keeps the flashlight very close and tight to the Weapon. Made from 6061 Aluminum. with a black anodized finish. It is manufactured to fit MIL-STD-1913 Rail Systems.
Where to purchase Low Pro Products