header-LowPro

Rails


Riser Mount
Mfr # A-2076

Click Image for Additional Pictures
Weight: 1.8oz

Used with Mfr # A-2075 JPoint / Docter / Burris Optic Mount, this will allow optic to co-witness the Iron Sights when used on the AR A-3 style Flat Top. This Riser Block will now also accept the Aimpoint Micro Red Dot, to be directly mounted on top of Riser Block, and will allow co-witnessing of the Iron Sigths when used on the AR A-3 style Flat Top. Manufactured to MIL-STD-1913.   Machined from a solid billet of  6061-T6 Aluminum, and finished per Military Specification MIL-A-8625  Black Anodized finish.

 

 

 $51.95

Quantity:  


Riser Mount
Mfr # A-2080

Click Image for Additional Pictures
Weight: 1.9oz

Used with Mfr # A-2077-78-79 MRD  Mounts, this will allow optic to co-witness the Iron Sights when used on the AR A-3 style Flat Top. This Riser Block will now also accept the Aimpoint Micro Red Dot, to be directly mounted on top of Riser Block, and will allow co-witnessing of the Iron Sigths when used on the AR A-3 style Flat Top.  Manufactured to MIL-STD-1913.   Machined from a solid billet of  6061-T6 Aluminum, and finished per Military Specification MIL-A-8625  Black Anodized finish.

 

 $51.95

Quantity:  


Extended 45° Accessory Rail
Mfr # A-3010

Click Image for Additional Pictures
Weight: 1.7oz

This item is great for extending scope rail off to the side for additional accessories; ideal for standard rifles where you have limited rail space. This will extend a mounting point out from under the scope to the left or right side. Will work with all our MRD Mounts to achieve a secondary Optic at the  1 o’clock position. Will clear a 50mm objective. Rail is manufactured to MIL-STD-1913. Machined from a solid billet of 6061-T6 Aluminum, and finished per Military Specification MIL-A-8625 Black Anodized finish.

 

 

$51.99

Quantity:  


M1A / M14 Top Extended Rail 12″
Mfr # A-3026

Click Image for Additional Pictures
Weight 8.2oz

 

 

 

 

This rail system is designed for the Springfield M1A Scout / Socom. A direct replacement to the factory 4” OEM rail, it mounts directly to the barrel using the existing barrel clamp, or the one supplied, and runs back to the stripper clip . Comes complete with rail, new barrel clamp, screws, and dovetail clip, this will also allow for mounting the rail to a standard M1A with slight modification to the hand guard. Bolt can be removed for cleaning without removal of the rail. A radius is milled down the center of the rail, this will allow for the use of the iron sights while still mounted to the weapon. This accessory rail will allow you to have more options when mounting optics to the weapon, allowing you to get the proper Eye Relief on the optic of your choice. Rail is approximately 12 “ long. Fits standard barrel (SOCOM, SCOUT SQUAD, and STANDARD Models), will not fit Loaded/National Match (medium) barrel or Super Match (heavy) barrel.  Manufactured to MIL-STD-1913.   Machined from a solid billet of 6061-T6 Aluminum, and finished per Military Specification MIL-A-8625  Black Anodized finish.

$182.95

Quantity:  


“NEW”  M1A / M14 Top Extended Rail 15″
Mfr # A-3029

Click Image for Additional Pictures
Weight 9.2oz

 

 

 

 

This rail system is designed for the Springfield M1A Scout / Socom. A direct replacement to the factory 4” OEM rail, it mounts directly to the barrel using the existing barrel clamp, or the one supplied, and runs back to the stripper clip . Comes complete with rail, new barrel clamp, screws, and dovetail clip, this will also allow for mounting the rail to a standard M1A with slight modification to the hand guard. Bolt can be removed for cleaning without removal of the rail.  A radius is milled down the center of the rail, this will allow for the use of the iron sights while still mounted to the weapon. This accessory rail will allow you to have more options when mounting optics to the weapon, allowing you to get the proper Eye Relief on the optic of your choice. Rail is approximately 15″ long. Fits standard barrel (SOCOM, SCOUT SQUAD, and STANDARD Models), will not fit Loaded/National Match (medium) barrel or Super Match (heavy) barrel. Manufactured to MIL-STD-1913. Machined from a solid billet of 6061-T6 Aluminum, and finished per Military Specification MIL-A-8625 Black Anodized finish.

$197.95

Quantity:  


M1A / M14 Front Rail Kit
Mfr # A-3025

Click Image for Additional Pictures
Weight: 1.4oz

This rail mounts over the front OEM sling swivel, just remove stock rivets, mount original front sling swivel between rail and stock, fasten with washers and screws provided in kit. This 3 ½” rail is great for mounting a bipod, or other accessories. Not limited to the M1A / M14, this rail can be mounted on other weapons that have a need for a rail. Rail is manufactured to MIL-STD-1913. Machined from a solid billet of 6061-T6 Aluminum. and finished per Military Specification MIL-A-8625 Black Anodized finish.

 

$42.95

Quantity:  


M1A Mid Rail for Scout / Socom
Mfr # A-3024

Click Image for Additional Pictures
Weight: 2.4oz

This rail is a direct replacement to the factory OEM rail. It will give you a full true MIL-STD-1913 Picatinny rail. This Rail mounts directly to the barrel using the existing barrel clamp, or the one supplied. Comes complete with rail, new barrel clamp, and screws. This accessory rail will allow for more options when mounting optics, it allows you to utilize the entire 4” of the rail when mounting different configurations of optics. This rail will fit the M1A Scout / Socom Rifles. (Will also fit the standard rile with modification to the handguard). Fits original standard barrel, will not fit match (heavy) barrel. Machined from a solid billet of 6061-T6 Aluminum, and finished per Military Specification MIL-A-8625 Black Anodized finish.

$69.95

Quantity:  


ACOG Rail Mount
Mfr # A-3011

Click Image for Additional Pictures
Weight: 1.1oz

This rail mounts around the body of the ACOG, allowing for the mounting of such devices as lasers, and Micro Red Dots. Designed around the ACOG model TA-31, this mount will fit other models with the same body diameter. It is manufactured to fit MIL-STD-1913 Rail Systems. Machined from a solid billet of 6061-T6 Aluminum, and finished per Military Specification MIL-A-8625 Black Anodized finish.

 

 

$54.50

Quantity:  


M-92/85 Scope Mount
Mfr # A-3027

A-3027

Click Image for Additional Pictures
Weight: 0.7oz

This Scope Mount is designed to fit the popular Yugo M-92/85 Carbine / Pap Pistol. Rail is manufactured to MIL-STD-1913. Machined from a solid billet of 6061-T6 Aluminum, and finished per Military Specification MIL-A-8625 Black Anodized finish.

 

 

 

 

$33.95

Quantity:  


AKSU Scope Mount
Mfr # A-3028

A-3028

Click Image for Additional Pictures

This Scope Mount is designed to fit the popular Russian and Bulgarian AKSU Carbine and pistol.  Rail is manufactured to MIL-STD-1913.   Machined from a solid billet of 6061-T6 Aluminum, and finished per Military Specification MIL-A-8625  Black Anodized finish.

$29.95

Quantity: